www.dfi.com
Chapter 4 BIOS Setup
43
Chapter 4
Security
This section configures security-related settings.
TPM Availability
Show or hide the TPM availability and its configurations.
TPM Operation
Enable or disable the TPM function. It displays the following options:
• No Operation: No changes to the current state.
• Disable: Disable and deactivate TPM.
• Enable: Enable and activate TPM.
Clear TPM
Remove all TPM ownership contents.
Set Supervisor Password
Enter to set supervisor password for entering the BIOS setup utility or upon power-on
self-test (POST) depending on the configuration of the following Power-on Password
option.
Power on Password
If you select to set the supervisor password, this option will be shown. Enable or dis-
able the system to require password at boot.
Console Redirection
Console redirection lets you monitor and control a system from a remote station by re-directing
the host screen output through a serial port.
Console Serial Redirect
Enable or disable the console redirection function. (The default is disabled.) If you
select to enable it, please configure the following parameters for serial communication
between the system and a remote station:
Terminal type: VT_100, , VT_UTF8 or PC_ANSI.
Baud rate: 115200, 57600, 38400, 19200, 9600, 4800, 2400 or 1200.
Data bits: 8 Bits or 7 Bits.
Parity: None, Even or Odd.
Stop bits: 1 Bit or 2 Bits.
Flow control: None, RTS/CTS or XON/XOFF
This is the global setting for all of the designated serial ports for the console redirec-
tion function.
COMA/COMB/PCI Serial Port
Enable or disable the serial redirection function for each of the detected serial ports on
the system. And configure the serial communication parameters to be used between
the system and a remote station. Alternatively, choose to use the pre-configured global
settings from the previous menu.
