www.dfi.com
Chapter 4 BIOS Setup
38
Chapter 4
SATA Controller(s)
Enable or disable Serial ATA devices.
SATA Speed
Select Serial ATA device speed from Gen1 (1.5 Gbit/s), Gen2 (3 Gbit/s), Gen 3 (6
Gbit/s) or auto.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI Mode
This option allows the Serial ATA devices to use AHCI (Advanced Host Controller Inter-
face).
RAID Mode
This option allows you to create RAID using Intel
®
Rapid Storage Technology on the
Serial ATA devices.
Serial ATA Port 0, 1, 2, and 3 Hot Plug
Enable or disable each Serial ATA port and its hot plug function.
SATA Configuration
This section configures SATA controllers and their mode of operation.
USB Configuration
This section configures the parameters of the USB device.
Legacy USB Support
Disabled
Disable USB keyboard/mouse/storage support.
Enabled
Enable USB keyboard/mouse/storage support under UEFI and DOS environment.
UEFI Only
Enable USB keyboard/mouse/storage support only under UEFI environment.
XHCI Hand-off
Set this option to disabled if the operating system supports xHCI hand-off (e.g. more
recent versions of Windows) and enabled if the operating system does not support
xHCI hand-off (e.g. older versions of Windows).
