DFI KD330-H110 User Manual Download

Page: 47 / 73

www.dfi.com

Chapter 4 Supported Software

Chapter 4

Chapter 4 - Supported Software

Install drivers, utilities and software applications that are required to facilitate and enhance the

performance of the system board. You may acquire the software from your sales representa-

tives, from an optional DVD included in the shipment, or from the website download page at

https://www.dfi.com/DownloadCenter

Intel Chipset Software Installation Utility

The Intel Chipset Software Installation Utility is used for updating Windows

INF files so that

the Intel chipset can be recognized and configured properly in the system.

To install the utility, download “KD330 Chipset Driver” zip file at our website.

1. Setup is ready to install the

utility. Click “Next”.

2. Read the license agreement

then click “Accept”.

3. Go through the readme

document for more installa-

tion tips then click “Install”.

5. After completing installa-

tion, click “Restart Now” to

exit setup.

Restarting the system will

allow the new software

installation to take effect.

4. The step displays the

installing status in the prog-

ress.

Summary of Contents for KD330-H110










































































Search results

Summary of Contents for KD330-H110

Reviews:

Related manuals for KD330-H110

Brands by name

Popular brands

DFI KD330-H110, User Manual

Search results

Summary of Contents for KD330-H110

Reviews:

Related manuals for KD330-H110

Brands by name

Popular brands