9 5
3
BIOS Setup
Wake Up On LAN
Set this field to Enabled to wake up the system via the onboard
LAN or via a LAN card that uses the PCI PME (Power Manage-
ment Event) signal to remotely wake up the system. Access to the
LAN card will cause the system to wake up. Refer to the card’s
documentation for more information.
Resume By Ring
When this field is set to Enabled, the system will power-on to re-
spond to calls coming from an external modem.
Power-On By Alarm
Enabled
When Enabled, you can set the time you would like the
Soft Power Down (Soft-Off) PC to power-on in the
“Time (dd:hh:mm) of Alarm” field. However, if the sys-
tem is being accessed by incoming calls or the network
prior to the time set in the field, the system will give
priority to the incoming calls or network.
Disabled
Disables the automatic power-on function. (default)
Day of Month Alarm
0
The system will power-on everyday according to the
time set in the “Time (hh:mm:ss) Alarm” field.
1-31
Select a date you would like the system to power-on.
The system will power-on on the set date, and time set
in the “Time (hh:mm:ss) Alarm” field.
Time (hh:mm:ss) of Alarm
This is used to set the time you would like the system to power-on.
Summary of Contents for Infinity NF series
Page 1: ...System Board User s Manual 935 NF4F05 300G 92440643 ...
Page 25: ...25 1 Introduction ...
Page 26: ...26 Introduction 1 ...
