50
2
Hardware Installation
The system board supports the chassis intrusion detection function.
Connect the chassis intrusion sensor cable from the chassis to the
chassis open connector (J11). Whenever a chassis component has
been removed, the sensor sends signal to the connector alerting you
of a chassis intrusion event.
Hardware Monitor for Windows
Install the “Hardware Monitor for Windows” utility. By default, the
chassis intrusion detection function is disabled. When enabled, a
warning message will appear when the chassis is open. The utility can
also be configured so that a beeping alarm will sound when the
chassis is open. Refer to the “Hardware Monitor for Windows” sec-
tion in chapter 4 for more information.
Chassis Open Connector
A
B
C
1
Intel
ICH7R
BIOS
X
1
2
Ground
Chassis signal
