17
2
Hardware Installation
Installing the Memory Module
1. Make sure the PC and all other peripheral devices connected to
it has been powered down.
2. Disconnect all power cords and cables.
3. Locate the SODIMM 2 socket on the system board.
4. Push the “ejector tabs” which are at the ends of the socket to
the side.
Ejector
tab
5. Note how the module is keyed to the socket. Grasping the
module by its edges, position the SODIMM above the socket
with the “notch” in the module aligned with the “key” on the
socket. The keying mechanism ensures the module can be
plugged into the socket in only one way.
SODIMM 2
Ejector
tab
6. Seat the module vertically, pressing it down firmly until it is com-
pletely seated in the socket. The ejector tabs at each end of the
socket will automatically snap into the locked position to hold
the SODIMM in place.
Key
