32
If you choose “System” in the Security Option, you will be prompted for
a password every time you cold boot your system or access setup. If
you choose “Setup”, you will be prompted for a password only when
trying to access setup.
If the changes you made are incorrect or you change your mind, press
<F6> or <F7> to return to the default settings. Press <Esc> after mak-
ing the changes to return to the main menu.
Chipset Features Setup
The G586VPM/T uses VLSI chipset. The Chipset Features Setup al-
lows you to modify some functions to optimize system performance. It
also allows you to enable, disable or select the port address of the
built-in serial ports, parallel port, floppy disk controller and hard disk
controller.
If you press <Enter>, a screen similar to the one below will appear.
Use the arrow keys to move the highlight bar to the option you wish to
change or modify. Use the <Page Up>, <Page Down>, <+> or <-> keys
to make the corresponding changes.
If the changes you made are incorrect or you change your mind, press
<F6> or <F7> to return to the default setting.
