28
Jumper Setting for Display
Jumper JP3
Display Type Select
Jumper JP3 sets the display adapter to color or mono. This jumper
must match the type of display adapter installed. If you change your
video adapter, make sure this jumper is changed accordingly.
1
3
2
1
3
2
2-3 On: Mono
1-2 On: Color
(default)
Built-in Ports
The G586IPB/E system board is equipped with two serial ports, one
parallel printer port, one FDD connector, two IDE hard disk shrouded
headers and one PS/2 mouse connector. Refer to page 12 for the loca-
tions of the built-in connectors and pin 1 of those connectors.
IDE Cable
Printer Cable
Floppy Cable
COM A
COM B
Mouse Port
