DFI EC300 Series, User Manual

Page: 46 / 208

3
46
Installing Devices
Installing the mSATA Card
1. Insert the latch into the mounting holes in accordance with the length of the
mSATA card. Push the latch down until the clips at each end of the latch lock
into position. You will hear a distinctive "click", indicating the latch is correctly
locked into position.
2. Grasping the mSATA card by its edges, align the card into the slot at an ap-
proximately 30 degrees angle. Apply firm even pressure to each end of the
card until it slips down into the slot. The contact fingers on the edge of the
card will almost completely disappear inside the slot.
Latch