12
Chapter 2
HARDWARE INSTALLATION
User's Manual |
EB100-KU
X
Assembly
System Board
The system board is secured onto the top cover via four stand-offs and spring screws. The top
cover also acts as the base for the system and a heatsink for the CPU.
Side Cover
The cover for both sides come in one piece and is secured onto the top cover as illustrated
below. Please make sure the side cover metal piece is oriented correctly by aligning the inden-
tation to that on the top cover.
A
A
B
B
Place the assembly top-side down
on a stable worksurface. Place
the system board onto the top
cover by aligning the mount holes
to the stand-offs. The two stand-
offs closer to the rear panel (A)
go through the mount holes and
are rimmed as opposed to thoes
closer to the front panel (B).
Fasten the spring screws into the
standoffs to secure the system
board.
x4
Front
Panel
(Top-side
Down)
Front
Panel
(Top-side
Down)
x4
