12
User's Manual |
CS620-H310
Chapter 2
HARDWARE INSTALLATION
6. Remove the protective cap
from the CPU socket. The
cap is used to protect the
CPU socket against dust and
harmful particles. Remove the
protective cap only when you
are about to install the CPU.
5. Lift the load lever and the load
plate all the way up as shown in
the photo.
Load lever
Load
plate
Protective cap
7-1.Insert the CPU into the socket.
The gold triangular mark on the
CPU must align with the cham-
fer corner of the CPU socket
shown in the photo.
Golden triangular
mark
X
CPU
X
Installing the CPU
7-2. Two keys on the socket
and notches on the CPU
also facilitate alignment.
7-3.The CPU’s notch will fit into
the socket’s alignment key
when it’s seated in the cor-
rect orientation.
Alignment key
Alignment key
X
CPU
X
Installing the CPU
8. Close the load plate then
push the load lever down.
While closing the load plate,
make sure the front edge of
the load plate slides under
the retention knob.
9. Press down the load lever
and hook it under the reten-
tion tab.
Retention knob
Load lever
Important:
The CPU will fit in only one orientation and can easily be seated without exerting
any force.
