manualshive.com logo in svg

DFI CS35-SC, User Manual

Share
Download
DFI CS35-SC User Manual Download Page 83

83

4

Supported Softwares

4.5 SoundMAX Integrated Digital  Audio Drivers

for Windows

 95/98/NT (CS65-SC only)

1. Insert the CD into a CD-ROM drive. The autorun screen (Main

Board Utility CD) will appear.

2. Click 

“SoundMAX Integrated Digital Audio Drivers for Windows”

.

3. The “Welcome” screen will appear. Click  “Next” to install the

driver.

4. The system will restart.

5. Follow the prompts to continue with the installation.

4.6 Creative ES1373 Audio Drivers for Windows

(CS65-SU only)

1. Insert the CD into a CD-ROM drive. The autorun screen (Main

Board Utility CD) will appear.

2. Click 

“Creative ES1373 Audio Drivers for Windows”

.

3. The “Sound Blaster Audio” screen will appear. Click “Yes” to install

the driver.

4. The system will restart.

5. Follow the prompts to continue with the installation.

4.7 Microsoft DirectX 7.0 Driver

1. In “My Computer”, double-click the CD-ROM drive where you

inserted the CD.

2. The autorun screen (Main Board Utility CD) will appear. Click

“Microsoft DirectX 7.0 Driver”.

3. Click “Yes” to continue.

4. Follow the prompts on the screen to complete installation.

5. Restart the system.

Summary of Contents for CS35-SC































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands