2
26
Hardware Installation
2.6 Jumper Settings for Wake-On-USB Keyboard
Wake-On-USB Keyboard - Jumper JP12
The Wake-On-USB Keyboard function
allows you to use a USB keyboard to
wake up a system that is in the S3 (STR
- Suspend To RAM) state. By default,
JP12 is disabled. To use this function, set
JP12 to 2-3 On. USB KB Wake-Up
From S3 in the Power Management
Setup submenu of the BIOS must also
be enabled.
Important:
The 5VSB power source of your
power supply must support
≥
1.5A.
2-3 On: Enable
1-2 On: Disable
(default)
2-3 On: Enable
1-2 On: Disable
(default)
3. The 5VSB power source of your power supply must
support
≥
720mA.
1
2
3
1
2
3
1
2
3
1
2
3
