www.d
fi
.com
18
Chapter 2 Hardware Installation
Chapter 2
RJ45 LAN Ports
The two LAN ports allow the system board to connect to a local area network by means of a
network hub.
BIOS Setting
Configure the onboard LAN ports in the Advanced menu (“ACPI Configuration” submenu) of
the BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to the chapter 4 for more information.
LAN 1
Features
CS101-H310 :
• Intel
®
I211AT PCIe
• Intel
®
I219V PCIe
CS101-Q370/C246
• Intel
®
I211AT PCIe
• Intel
®
I219LM PCIe
LAN 2
LAN 1
LAN 2
The USB device allows data exchange between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals.
The CS101-Q370/C246 motherboard is equipped with 4 onboard USB 3.1 Gen 2 ports (USB
1-2/3-4) at the rear panel I/O ports. The 10-pin connectors allow you to connect 4 additional
USB 2.0 ports (USB 5-6/7-8).
The CS101-H310 motherboard is equipped with 4 onboard USB 3.1 Gen 1 ports (USB 1-2/3-4)
at the rear panel I/O ports. The 10-pin connectors allow you to connect 4 additional USB 2.0
ports (USB 5-6/7-8).
The additional USB ports may be mounted on a card-edge bracket. Install the card-edge
bracket to an available slot at the rear of the system chassis and then insert the USB port
cables to a connector.
USB Ports
USB 2
USB 1
USB 4
USB 3
USB 3.1 Gen 1 USB 3.1 Gen 1
USB 3.1 Gen 2 UBS 3.1 Gen 2
CS101-H310
CS101-Q370/C246
U
U
LAN 1
LAN 2
10
VCC
-Data0 +Data0 GND
VCC
-Data1 +Data1
GND
NC
9
1
2
USB 7-8
USB 5-6
USB 2.0
USB 2
USB 1
USB 4
USB 3
U
U