www.d
fi
.com
17
Chapter 2 Hardware Installation
Chapter 2
Rear Panel I/O Ports
The rear panel I/O ports consist of the following:
• 1
DC-in
• 4 USB 3.1 Gen 2 ports (CS101-Q370/C246)
• 4 USB 3.1 Gen 1 ports (CS101-H310)
• 2 RJ45 LAN ports
• 1 HDMI port
• 2 DP++ ports
12V DC-in
DC-in
This jack is considered a low power solution. Connect a DC power cord to this jack. Using a
voltage more than the recommended range may fail to boot the system or cause damage to
the system board.
The DC-in jack on the system board co-lays with a 4-pin vertical type connector (optional) as
the photo displayed below.
DC-in (default)
4-pin Vertical Type (optional)
