www.dfi.com
CS101-Q370/C246/H310
Chapter 3
- BIOS Setup
38
NCT6116D Super IO Configuration
This section is used to configure the I/O functions supported by the onboard Super I/O chip.
WatchDog Timer Unit
Selection
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
NCT6116D Super IO Configuration
Super IO Chip
WatchDog Timer Unit
SuperIO WatchDog Timer
Serial Port 1 Configuration
Serial Port 2 Configuration
Serial Port 3 Configuration
Serial Port 4 Configuration
Advanced
NCT6116D
[Second]
0
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
WatchDog Timer Unit
Select WatchDog Timer Unit: Second or Minute.
SuperIO WatchDog Timer
Set SuperIO WatchDog Timer Timeout value. The range is from 0 (disabled) to 255.
► Serial Port 1/2/3/4 Configuration
Configure the parameters of serial port 1 (COM 1) to serial port 4 (COM 4) as detailed later.
►
Advanced
Serial Port
Enable or disable the serial COM port.
Electrical Interface Mode
Configure the serial mode of the current port — RS232, RS422, RS485. This field is not avail-
able for COM 3 & COM 4 which only support RS232.
Enable or Disable Serial
Port (COM)
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Serial Port 1 Configuration
Serial Port
Device Settings
Electrical Interface Mode
Advanced
[Enabled]
IO=3F8h; IRQ=4;
[RS232]
→←:
Select Screen
↑↓:
Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
► Serial Port 1/2/3/4 Configuration
►
Advanced
►
NCT6116D Super IO Configuration
