www.dfi.com
CS101-Q370/C246/H310
Chapter 2
- Hardware Installation
27
Front Audio Connector
►
Internal I/O Connectors
►
Expansion Slots
Please follow the steps below to install the card into the socket.
Step 2:
Press the end of the card far
from the socket down until
against the stand-off.
Step 3:
Screw tight the card onto the
stand-off with a screw driver
and a stand-off screw until
the gap between the card and
the stand-off closes up. The
card should be lying parallel to
the board when it’s correctly
mounted.
Step 1:
Insert the card into the socket
at an angle while making sure
the notch and key are perfectly
aligned.
M.2 Module
M.2 Socket
Key
Stand-off
Notch
The Front Audio internal connector allows you to connect to the second line-out and mic-in
jacks that are at the front panel of your system.
BIOS Setting
Configure these Audio devices in the Chipset menu (“PCH-IO Configuration” > “HD Audio Con-
figuration”) of the BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the audio driver. Refer to the chapter 4 for more information.
Pin Assignment
Pin Assignment
1
Mic-L
2
GND
3
Mic-R
4
N.C.
5
Line-Out-R
6
Mic-JD (sense)
7
GND
8
KEY
9
Line-Out-L
10
Line-JD (sense)
▼
Front Audio Pin Assignment
10
9
1
2
▼
Front Audio
►
Internal I/O Ports
