DFI CR100-CRM, User Manual

Page: 92 / 177

92
3
BIOS Setup
Notice: BIOS SPI ROM
1. The Intel
®
Management Engine has already been integrated into this system
board. Due to the safety concerns, the BIOS (SPI ROM) chip cannot be
removed from this system board and used on another system board of the
same model.
2. The BIOS (SPI ROM) on this system board must be the original equipment
from the factory and cannot be used to replace one which has been utilized on
other system boards.
3. If you do not follow the methods above, the Intel
®
Management Engine will
not be updated and will cease to be effective.
Note:
a. You can take advantage of fl ash tools to update the default
confi guration of the BIOS (SPI ROM) to the latest version anytime.
b. When the BIOS IC needs to be replaced, you have to populate it
properly onto the system board after the EEPROM programmer has
been burned and follow the technical person's instructions to con-
fi rm that the MAC address should be burned or not.