DFI CMS631-H420E, User Manual

Page: 44 / 50

42
Chapter 3
BIOS SETTINGS
User's Manual | CMS631
InsydeH2O Setup Utility Rev. 5.0
F1 Help
Esc Exit
↑/↓ Select Item
←/→ Select Item
F5/F6 Change Values
Enter Select
X
SubMenu
F9 Setup Defaults
F10 Save and Exit
InsydeH2O Setup Utility Rev. 5.0
F1 Help
Esc Exit
↑/↓ Select Item
←/→ Select Item
F5/F6 Change Values
Enter Select
X
SubMenu
F9 Setup Defaults
F10 Save and Exit
Enable Console Redirection
Function
Console Redirection Setup
Console Serial Redirect
Terminal Type
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
► COM1
Enable VT-100, 115200, N81
► COM2
Disable VT-100, 115200, N81
► COM3
Disable VT-100, 115200, N81
► COM4
Disable VT-100, 115200, N81
► COM5
Disable VT-100, 115200, N81
► COM6
Disable VT-100, 115200, N81
COM1
Port Enable
UseGlobalSetting
<Enabled>
<VT_100>
<115200>
<8 Bits>
<None>
<1 Bit>
<None>
<Enabled>
<Enabled>
Advanced Advanced
Terminal Type
Select terminal type — VT_100, , VT_UTF8 or PC_ANSI.
Baud Rate
Select baud rate — 115200, 57600, 38400, 19200, 9600, 4800, 2400 or 1200.
Data Bits
Select data bits — 7 bits or 8 bits.
Parity
Select parity bits — none, even or odd.
Stop Bits
Select stop bits — 1 bit or 2 bits.
Flow Control
Select flow control type — none, RTS/CTS or XON/XOFF.
Console Redirection
Configure COM port serial settings in the submenu.
X
COM1/COM2/COM3/COM4/COM5/COM6
Configure individual COM port serial settings in the submenu.
Port Enable
This field is used to enable or disable the COM port to redirect the console.
Use Global Setting
This field is to enable or disable using the global setting. When "Use Global Setting" is enabled,
settings of the current port will dependent on Console Redirection settings. When "Use Global
Setting" is disabled, settings of the current port can be configured independently in this section.
X
Advanced