22
Chapter 2
HARDWARE INSTALLATION
User's Manual |
CMS630
1
X
Internal I/O Connectors
SATA Pin Assignment
The Serial ATA (SATA) connectors are used to connect the Serial ATA device. SATA 3.0 is sup-
ported by the five SATA ports and provides data rate up to 6Gb/s. Connect one end of the Se-
rial ATA cable to a SATA connector and the other end to your Serial ATA device.
SATA (Serial ATA)
SATA 0/1
from left to right
•
4 Serial ATA 3.0 ports with data transfer rate up to 6Gb/s
•
Integrated Advanced Host Controller Interface (AHCI) controller
•
Support RAID 0, RAID 1, RAID 5, RAID 10
Features
7
RX-
GND
TX+
TX-
GND
1
RX+
GND
SATA 2/3
from left to right
Digital I/O Connector
X
Internal I/O Connectors
1
Pin Assignment
Pin Assignment
1
GND
2
GND
3
DIO7
4
DIO6
5
DIO5
6
DIO4
7
DIO3
8
DIO2
9
DIO1
10
DIO0
11
DIO8
12
DIO9
13
DIO10
14
DIO11
15
DIO12
16
DIO13
17
DIO14
18
DIO15
19
GND
20
---
The 16-bit Digital I/O connector provides powering-on function to external devices that are
connected to these connectors. The pin functions of the 16-bit digital I/O connector are listed
below.
1
20
11
10
