1
Introduction
11
The system board is equipped with an IrDA connector
for wireless connectivity between your computer and
peripheral devices. The IRDA (Infrared Data Association) specification
supports data transfers of 115K baud at a distance of 1 meter.
The system board supports 4 USB 1.1 por ts at
12Mb/second bandwidth. USB allows data exchange
between your computer and a wide range of simultaneously
accessible external Plug and Play peripherals.
This feature allows the system that is in the
Suspend mode or Soft Power Off mode to
wake-up/power-on to respond to calls coming from an external
modem, internal modem or respond to calls from a modem PCI
card that uses the PCI PME (Power Management Event) signal to
remotely wake up the PC.
Important:
If you are using a modem add-in card, the 5VSB power source
of your power supply must support a minimum of
≥
720mA.
This feature allows the network to remotely
wake up a Soft Power Down (Soft-Off) PC.
It is supported via the onboard LAN port, via a PCI LAN card that
uses the PCI PME (Power Management Event) signal or via a LAN
card that uses the Wake-On-LAN connector. However, if your
system is in the Suspend mode, you can power-on the system only
through an IRQ or DMA interrupt.
Important:
The 5VSB power source of your power supply must support
≥
720mA.
IrDA
Wake-On-Ring
Wake-On-LAN
USB 1.1
