www.d
fi
.com
Chapter 3 Hardware Installation
28
Chapter 3
Installing CH960-CM246/QM370/HM370 onto a Carrier Board
Important:
The carrier board used in this section is for reference purpose only and may not
resemble your carrier board. These illustrations are mainly to guide you on how to
install CH960-CM246/QM370/HM370 onto the carrier board of your choice.
1. Grasp CH960-CM246/QM370/HM370 by its edges and position it on top of the carrier board
with its mounting holes aligned with the standoffs on the carrier board. This helps align
the COM Express connectors of the two boards to each other.
COM Express connectors on
CH960-CM246/QM370/HM370
COM Express connectors on the
carrier board
2. Apply firm even pressure to the side with the COM Express connectors first and push down
the entire board. You will hear a “click”, indicating the module is correctly seated in the
COM Express connectors of the carrier board.
Note:
The illustrations above show the pressing points of the module onto the carrier board.
B
e careful when pressing the module, it may damage the socket.
Pressing
points
BIOS ROM socket
