background image

www.d

fi

 .com

Chapter 7 Intel AMT Settings 

63

Chapter 7

7.   Enter a new password in the space provided under Intel(R) ME New Password then press 

Enter. The password must include: 

• 8-32 characters 

•  Strong 7-bit ASCII characters excluding 

: , 

and

 ”

 characters

•  At least one digit character (0, 1, ...9)

•  At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. !, $, ;)

•  Both lower case and upper case characters

Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.7.1122

Copyright(C) 2003-17 Intel Corporation. All Rights Reserved

[



] =Move Highlight     [Enter] =Select Entry           [Esc] =Exit

Intel(R) ME New Password

Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.7.1122

Copyright(C) 2003-17 Intel Corporation. All Rights Reserved

[



] =Move Highlight     [Enter] =Select Entry           [Esc] =Exit

Verify password

6.   If you want to change ME password, select 

Change ME Password

 then press Enter. 

Enter the current password in the space provided under Intel(R) ME Password then press 

Enter.

Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.7.1122

Copyright(C) 2003-17 Intel Corporation. All Rights Reserved

INTEL(R) ME PLATFORM CONFIGURATION

Change ME Password

FW Update                                 <Enabled>

        Intel(R) ME New Password

[



] =Move Highlight     [Enter] =Select Entry           [Esc] =Exit

Intel(R) ME Password

Change ME Password

FW Update                                 <Enabled>

        Intel(R) ME New Password

Change ME Password

FW Update                                 <Enabled>

        Intel(R) ME New Password

9.  Select 

FW Update 

then press Enter. Select 

Enabled

 or 

Disabled

 or

 Password Pro-

tected

 then press Enter.

Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.7.1122

Copyright(C) 2003-17 Intel Corporation. All Rights Reserved

Change ME Password
FW Update                                   

<Enabled>

  

[



] =Move Highlight   <Enter> =Complete Entry  [Esc] =Discard Changes

Disabled
Enabled
Password Protected

INTEL(R) ME PLATFORM CONFIGURATION

8. You will be asked to verify the new password. Enter the same new password in the space 

provided under Verify Password then press Enter. 

INTEL(R) ME PLATFORM CONFIGURATION

INTEL(R) ME PLATFORM CONFIGURATION

Summary of Contents for CH960-CM246










































































Reviews: