2
28
Hardware Installation
The pin assignment of the CD audio-in connectors are shown below.
The system board is equipped with 3 CD audio-in connectors.
Depending on the type of CD audio cable included in your CD-
ROM package, connect one end of the cable to a CD audio-in
connector on the system board and the other end to the audio line-
out connector on your CD-ROM drive.
Connect the CD audio cable
to J23 (Mitsumi CD-ROM) or
J22 (Sony CD-ROM) if the
audio cable included in your
CD-ROM package should look
somewhat similar to the one
on the right.
Connect the CD audio cable to
J21 (Sony CD-ROM) if the
audio cable included in your
CD-ROM package should look
somewhat similar to the one on
the right.
Pin
1
2
3
4
J23 - Mitsumi
CD-L
CD-G
CD-R
CD-G
J22 - Sony
CD-L
CD-G
CD-G
CD-R
J21 - Sony
CD-L
CD-G
CD-G
CD-R
