2
Hardware Installation
15
1. Pull the tabs which are at the ends of the socket to the side.
2. Position the DIMM above the socket with the notches in the
module aligned with the keys on the socket.
3. Seat the module vertically into the socket. Make sure it is
completely seated. The tabs will hold the DIMM in place.
2.3 DIP Switch Settings for Processors
(For Factory Use Only)
You can not overclock an Intel Celeron
processor (PPGA) because
its frequency ratio is fixed by the manufacturer. The table on the next
page is for factory use only.
In the example above:
Switch 1: Off
Switch 2: On
Switch 3: Off
Switch 4: On
