57
3
Award BIOS Setup Utility
Reset Configuration Data
Enabled
The BIOS will reset the configuration data once
automatically. It will then recreate a new set of
configuration data.
Disabled
The BIOS will not reset the configuration data.
Assign IRQ for USB
When Enabled, the system automatically assigns an IRQ for the USB
device connected to your system. However, if you are not using USB
devices and an ISA slot requires an IRQ, set this function to Disabled.
The IRQ previously occupied by the USB device will be available for
the ISA slot.
Note:
When Disabled, a Yellow mark will appear in Windows
95/98s
Device Manager.
Assign IRQ for VGA
When Enabled, the system automatically assigns an IRQ for the VGA
card installed. Your VGA card will need an IRQ only when using the
video capture function of the card. If you are not using this function
and a new device requires an IRQ, you can set this function to
Disabled. The IRQ (previously occupied by the VGA card) will be
available for your new device.
Note:
When Disabled, a Yellow mark will appear in Windows
95/98s
Device Manager.
PCI Slot 1 Use IRQ and PCI Slot 2 Use IRQ
By default, an IRQ is automatically assigned to each PCI slot. You may
also manually assign an IRQ to these slots. The options are: 3, 4, 5, 7,
9, 10, 11, 12, 14 and 15.
