54
3
Award BIOS Setup Utility
PM Events
VGA
When set to On, the system will respond and wake up to any
VGA activity.
LPT & COM
Select the port you would like the system to respond and wake
up when an event occurs on that port.
HDD & FDD
When set to On, the system will respond and wake up to any
hard drive or floppy drive activity.
PCI Master
When set to On, the system will respond and wake up to any
PCI or bus master activity.
Resume On LAN/Ring
This field supports two functions.
•
When enabled, the system will power-on to respond to calls
coming through an external or internal modem. Refer to Wake-
On-Ring Connector in chapter 2 for more information.
•
When enabled, the LAN card in the system will allow the
network to power-on a Soft Power Down (Soft-Off) PC.
However, if your system is in the Suspend mode, you can wake
up the system only through an IRQ or DMA interrupt. Your
LAN card must support the remote wake up function. Refer
to Wake-On-LAN Connector in chapter 2 for more
information.
Resume On Alarm
Enabled
When Enabled, you can set the date and time you
would like the Soft Power Down (Soft-Off) PC to
power-on in the Date (of Month) and Resume
Time (hh:mm:ss) fields. However, if the system is
being accessed by incoming calls or the network
prior to the date and time set in these fields, the
system will give priority to the incoming calls or
network.
Disabled
Disables the automatic power-on function. (default)
