www.dfi.com
Chapter 3 Hardware Installation
13
Chapter 3
Connectors
CPU Fan Connector
Connect the CPU fan’s cable connector to the CPU fan connector on the board. The cooling fan
will provide adequate airflow throughout the chassis to prevent overheating the CPU and board
components.
BIOS Setting
“Module Board H/W Monitor” submenu in the Advanced menu of the BIOS will display the cur-
rent speed of the cooling fan. Refer to chapter 4 of the manual for more information
.
3
1
Sense
+12V
Ground
COM Express Connectors
The COM Express connectors are used to interface the BW968 COM Express board to a carrier
board. Connect the COM Express connectors (located on the solder side of the board) to the
COM Express connectors on the carrier board.
Refer to the “Installing onto a Carrier Board” section for more information.
Refer to the following pages for the pin functions of these connectors.
Intel
Pentium
Celeron
SPI
Flash
BIOS
Standby
Power LED
DDR3L_1 SODIMM
Intel
WGI211AT
SMSC
USB2517
iTE
IT8528E
1
CPU Fan
DDR3L_2 SODIMM
COM Express connector
C1
D1
C110
D110
B1
B110
A1
A110
COM Express connector
COM Express Connectors
