www.dfi.com
Chapter 3 Hardware Installation
12
Chapter 3
System Memory
The system board is equipped with 2GB/4GB/8GB DDR3L system memory onboard supporting
1600MHz, dual channel memory interface.
DDR3L
Important:
Electrostatic discharge (ESD) can damage your board, processor, disk drives, add-in
boards, and other components. Perform installation procedures at an ESD workstation
only. If such a station is not available, you can provide some ESD protection by wear-
ing an antistatic wrist strap and attaching it to a metal part of the system chassis. If
a wrist strap is unavailable, establish and maintain contact with the system chassis
throughout any procedures requiring ESD protection.
Important:
When the Standby Power LED is red, it indicates that there is power on the board.
Power-off the PC then unplug the power cord prior to installing any devices. Failure to
do so will cause severe damage to the board and components.
Intel
Pentium
Celeron
SPI
Flash
BIOS
Standby
Power LED
DDR3L_1 SODIMM
Intel
WGI211AT
SMSC
USB2517
iTE
IT8528E
1
CPU Fan
System Memory
DDR3L_2 SODIMM
COM Express connector
C1
D1
C110
D110
B1
B110
A1
A110
COM Express connector
DDR3L
Top View
Bottom View
