www.d
fi
.com
Chapter 4 BIOS Setup
35
Chapter 4
Enable/Disable UEFI Ipv4
Ipv6 PXE Boot Support
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
Setup Prompt Timeout
NumLock
Quiet Boot
Network Stack
Ipv4 PXE Support
Ipv6 PXE Support
Boot Option Priorities
Driver Option Priorities
Save & Exit
Advanced
Security
Main
Boot
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
1
[On]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Ipv4 PXE Support
When enabled, Ipv4 PXE boot supports. When disabled, Ipv4 PXE boot option will not
be created.
Ipv6 PXE Support
When enabled, Ipv6 PXE boot supports. When disabled, Ipv6 PXE boot option will not
be created.
Boot Option Priorities
Sets the system boot order.
Driver Option Priorities
Sets the driver boot order.
Note:
AL9A2 only supports UEFI boot, no Legacy boot
.
Save & Exit
Reset the system after
saving the changes.
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
Exit Saving Changes
Load Optimal Defaults
Discard Changes
Advanced
Main
Boot
Security
Save & Exit
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Exit Saving Changes
Select Yes and then press <Enter> to exit the system setup and save your changes.
Load Optimal Defaults
Select Yes and then press <Enter> to load optimal defaults.
Discard Changes
Select Yes and then press <Enter> to exit the system setup without saving your
changes.
