DFI AK74-SC User Manual Download Page 9

Page: 9 / 87

Introduction

Expansion Slots

The system board is equipped with 1 universal AGP slot. AGP is an

interface designed to support high performance 3D graphics cards. It

utilizes a dedicated pipeline to access system memory for texturing,

z-buffering and alpha blending. The universal AGP slot supports AGP

2x with up to 533MB/sec. bandwidth and AGP 4x with up to

1066MB/sec. bandwidth for 3D graphics applications. AGP in this

system board will deliver faster and better graphics to your PC.

The system board is also equipped with 4 dedicated PCI slots, 1

shared PCI/ISA slot and 1 AMR slot. AMR (Audio/Modem Riser) is

an interface designed for installing an audio riser card, modem riser

card or audio/modem riser card that is compliant to the AMR

specification.

Onboard Audio Features (AK74-SC only)

Supports Microsoft

DirectSound/DirectSound 3D

AC97 supported with full duplex, independent sample rate con-

verter for audio recording and playback

Onboard PCI Audio Features - Creative ES1373 (AK74-SU only)

Supports Microsoft

DirectSound /DirectSound 3D / DirectMusic

SW acceleration

64 voice wavetable synthesizer

Hardware SoundBlaster Pro for Windows DOS Box and

standard Microsoft Windows Sound 2.0

Digital I/O compatible with consumer mode (SPDIF)

Downloadable sound (DLS) level-1

ATX Double Deck Ports (PC 99 color-coded connectors)

Two USB ports

Two NS16C550A-compatible DB-9 serial ports

One SPP/ECP/EPP DB-25 parallel port

One mini-DIN-6 PS/2 mouse port

DIMMs

2MBx64/x72
4MBx64/x72
8MBx64/x72

Memory Size

16MB
32MB
64MB

DIMMs

16MBx64/x72
32MBx64/x72
64MBx64/x72

Memory Size

128MB
256MB
512MB

All manuals and user guides at all-guides.com

Summary of Contents for AK74-SC
























































































Search results

Summary of Contents for AK74-SC

Reviews:

Related manuals for AK74-SC

Brands by name

Popular brands

DFI AK74-SC, User Manual

Search results

Summary of Contents for AK74-SC

Reviews:

Related manuals for AK74-SC

Brands by name

Popular brands