38
2
Hardware Installation
The 915G-TMGF system board is equipped with an onboard IEEE
1394 port at location CN1 (IEEE 1394_1) of the system board.
It is also equipped with an IEEE 1394 connector at location J1
(1394_2) for connecting an additional 1394 port. The 1394 port
may be mounted on a card-edge bracket. Install the card-edge
bracket to the system chassis then connect the cable connector to
the 1394 connector on the system board. Make sure pin 1 of the
cable connector is aligned with pin 1 of the J1.
2.5.5 IEEE 1394 (915G-TMGF only)
1394_1
W
W
1394_2
1
2
1 0
9
TP
A
+
TP
A-
Ground
Ground
TPB-
TPB+
Key
+12V
+12V
Ground
