39
2
Hardware Installation
USB 4
USB 3
2.5.6 USB Ports
The system board supports 8 USB 2.0/1.1 ports. USB allows data
exchange between your computer and a wide range of
simultaneously accessible external Plug and Play peripherals.
Four onboard USB 2.0/1.1 ports (Black) are at locations CN1 (USB
1-2) and CN2 (USB 3-4) of the system board.
J3 (USB 5-6) and J2 (USB 7-8) allow you to connect 4 additional
USB 2.0/1.1 ports. The USB ports may be mounted on a card-edge
bracket. Install the card-edge bracket to the system chassis then
insert the connector that is attached to the USB port cables to J2
or J3.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu
(“Onboard Device” section) of the BIOS. Refer to chapter 3 for
more information.
W
USB 2
USB 1
W
USB 5-6
W
USB 7-8
1
2
1 0
9
VCC
VCC
-Data
-Data
+Data
+Data
Ground
Ground
Key
N.
C
.
