62
Solve Warning Messages with Windows 95 IDE
If the version of Windows 95 under your IDE is one of the Win95 OSR2
or Win95 OSR2.1, there may be some warning messages appearing
while you boot up your system. This problem occurs for Win95 has not
recognized the TX chipset on the 586ITX board. To change files for
Win95 by knowing TX chipset, you may need to change some filies in
Win95. Please follow setps shown below.
Files
1. MSHDC.INF
2. MACHINE.INF
1. MSHDC.INF
2. MACHINE.INF
3. USB.INF
Version
OSR2
OSR2.1
1. Insert the IDE driver into Drive A.
2. Enter Win95 MS-DOS prompt window.
3. Type "CD windows" and press "Enter". (C:\windows>)
4. Type "CD INF" and press "Enter". (C:\windows\INF>)
5. Change "MSHDC.INF", "MACHINE.INF" and "USB.INF" to
"MSHDC.000", "MACHINE.000" and "USB.000".
Ex: C:\windows\INF>copy MSHDC.INF MSHDC.000
C:\windows\INF>copy MACHINE.INF MACHINE.000
C:\windows\INF>copy USB.INF USB.000 (only Win95 OSR2.1)
6. Go back to your prompt to A: and type "CD OSR2" or "CD OSR2.1"
and press "Enter". Then copy "MSHDC.INF", "MACHINE.INF" and
"USB.INF within the diskette to Drive C.
Ex: A:\OSR2>copy MSHDC.INF C:
A:\OSR2>copy MACHINE.INF C:
A:\OSR2.1>copy USB.INF C: (only Win95 OSR2.1)
