44
Integrated Peripherals
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
IDE HDD Block Mode
PCI Slot IDE 2nd Channel
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
Onboard FDC Controller
Onboard UART 1
Onboard UART 2
Onboard UART 2 Mode
Onboard Parallel Port
Parallel Port Mode
: Enabled
: Disabled
: Enabled
: Enabled
: AUTO
: AUTO
: AUTO
: AUTO
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
: Standard
: 378H/IRQ7
: SPP
ESC
F1
F5
F6
F7
:Quit
:Help
:Old Values
:Load BIOS Defaults
:Load Setup Defaults
↑↓→ ←
PU/PD/+/-
(Shift) F2
:Select Item
:Modify
:Color
USB Controller
: Disabled
IDE HDD Block Mode
Enabled
Disabled
The IDE HDD uses the block mode. The system BIOS will
check the hard disk drive for the maximum block size the
system can transfer. The block size will depend on the type
of hard disk drive installed.
The IDE HDD uses the standard mode.
PCI Slot IDE 2nd Channel
This allows you to designate an IDE controller card inserted into one of
the PCI slots as your secondary IDE controller.
The IDE controller card is designated as the secondary IDE
controller.
No IDE controller card occupying any of the PCI slots.
Enabled
Disabled
On-Chip Primary PCI IDE and On-Chip Secondary PCI IDE
These categories allow you to enable or disable the primary and sec-
ondary IDE controller. The default is Enabled. Select Disabled if you
want to add a higher performance caching or specialized controller.
