43
Pilot’s Operating Handbook DFE Ultralights Ascender III-C
ABBREVIATED CHECKLIST
(A complete checklist including the preflight inspection can be found in
BEFORE STARTING
1) Loose objects
- SECURED
STARTING
1) Low oil warning press-to-test switch
- TEST
2) Ignition Switches
– BOTH ON
3)
Throttle
-
CLOSED
4)
Prime
-
AS
REQUIRED
5)
Choke
–
ON
6) Propeller
- CLEAR, front and rear
7) Starter
– PULL
8)
Choke
-
OFF
9) Throttle
- 2000 RPM – 2 minutes
10) Throttle
– 2500 rpm until operating temps reached
11) Seat Belts/Shoulder Harness
– FASTENED
12) Radio, Intercom, GPS
- ON
13)
Eye
protection
–
ON
14)
Helmets
–
ON,
chinstraps
fastened
15)
Gloves
–
ON
BEFORE TAKEOFF
1) Flight Controls
- CHECK freedom of movement, proper operation
2)
Trim
system
-
DISENGAGED
3) Flight instruments, GPS and Radio
- CHECK and SET
4) Engine Instruments
- CHECK within operational ranges
5) Engine Run-Up
– 3000 – 3500 rpm
6)
Throttle
response
-
CHECK
7) Ignition switches
- CHECK one at a time (300 RPM maximum drop)
8) Engine Instruments
- CHECK normal indications
9) Throttle
– IDLE - 2000 RPM
10) Seat Belts/Shoulder Harness
- FASTENED
11) BRS Safety Pin
- REMOVED and stowed
AFTER LANDING
1) BRS Safety Pin
- REPLACED
SHUTDOWN