manualshive.com logo in svg

Deye SUN-18K-G05-AU, User Manual

Share
Download
Deye SUN-18K-G05-AU User Manual Download Page 23

- 21 -

7 Zero-export func�on via energy meter

When you are reading this, we believe that you have completed the connec�on according to 

the requirements of chapter 5, if you have been running your inverter at this �me, and you 

want to use the zero-export func�on, please turn off AC and DC switch of the inverter, and 

wait for 5 minutes un�l the inverter completely discharged. Please follow below Picture 7.11

to connect the energy meter.

For system wiring diagram, the red line refers to L line (L1, L2, L3), the black line refers to the 

neutral line (N). Connec�ng energy meter RS485 cable to inverter's RS485 port. It's recom

-

mended to install an AC switch between the inverter and the u�lity grid, the specs of the AC 

switch are determined by the power of load. 

If there is no integrated DC switch inside the inverter you purchased, we commend you to 

connect the DC switch. The voltage and current of the switch depend on the PV array you 

access.

Summary of Contents for SUN-18K-G05-AU





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands