Dexter Power NC500JS, User Manual

Page: 13 / 20

Dexter Power
13
EN
Original Instructions
JIG SAW
The numbers in the following text refer to the drawing on page 2.
WARNING -To reduce the risk of injury, user must read instruction manual. Save all warnings and
instructions for future reference.
Contents:
1 Machine data
2 Safety instructions
3 Assembly
4 Use
5 Service & Maintenance
Intended use
The machine is intended for making separating cuts and cutouts in wood, plastic, metal, ceramic plates and rubber while resting
firmly on the workpiece. It is suitable for straight and curved cuts having miter angles of up to 45°. Do not use machines, tools
and accessories for additional applications (see manufacturer’s instructions) for works other than those for which they are
designed for. All other applications are expressly ruled out.
1. EQUIPMENT DESCRIPTION
Technical specification:
Type designation NC500JS Jig Saw
Rated voltage 220V~ 60Hz
Rated power input 500W
Speed, n
0
0-2700/min
Cutting angle range 0-45°
Cutting capacity Wood: 55mm Steel: 8mm
Blade type T SHAPE
suggestion:
1) wear glove during operation
2) limit operating time and shorten trigger time.
Contents of packing
1 Jig saw
1 Dust extraction adaptor
1 Hex key
1 Blade for wood
1 Instruction manu al (with 1 safety instructions and 1 guarantee card)
After unpacking, check the tool and accessories for damages and do not use the tool in case something is defective.
Features
Fig. 1
1. ON/OFF switch
2. Lock-on button