Tip: See example below for how a custom agitation can be used to create a wet clean cycle.
Injection Source Names
Name specific injection sources to clearly show which chemical is being used in which stage or
cycle.
Delay Fill
With Delay Fill on, the stage does not begin decrementing time until the water level is met. This
ensures the load soaks or agitates the target time, even in cases of low water pressure and slow fills.
The default settings have Delay Fill turned ON.
Delay Spin
Delay Spin can be set to OFF or up to 150 seconds. Delay Spin can be used in slow drain situations to
reduce nuisance Slow Drain error codes. The default settings have Delay Spin turned OFF.
Parameter
Stage 1:
Prewash
Stage 2:
Soak
Stage 3:
Soak
Stage 4:
Soak / Wash
Stage 5:
Rinse
Stage 6:
Final Rinse
Temperature
Cold
Cold
NA
NA
Cold
Cold
Water Level
Low
High
High
High
High
High
Soap
None
Chemical 1
None
None
Chemical 5
Chemical 6
Soak Time
0 mins
10 mins
10 mins
10 mins
5 mins
5 mins
Agitate Time
2 mins
2 mins
2 mins
2 mins
2 mins
2 mins
Agitation Type
Wet Clean
Wet Clean
Wet Clean
Wet Clean
Wet Clean
Wet Clean
Drain Method
Standard
None
None
Standard
Standard
Standard
Spin Time
0 mins
NA
NA
0 mins
2 mins
2 mins
Spin Speed
NA
NA
NA
NA
60 G
100 G
Example: Wet Clean
Programming
Once all cycles are set, the programming file (called userconfig.xml) can be downloaded following
the instructions on the programming tab DexterLive.com.
At the machine, you can enter management view by pressing up on the idle screen.
Simply insert the USB, scroll to Import User Data, and begin using your customized washer cycles.
38
39
Part # 8533-109-001 12/21
Part # 8533-109-001 12/21
Machine
Mounting
Installation
& Operation
Programming
Trouble-
shooting
Machine
Service
Electrical
Wiring
Parts
Data
50Hz
Parts
Maintenance
Service Elec.
Compnents
