Dexter Laundry DC30X2 Series, Service And Parts Manual

Page: 10 / 124

Dry only fabrics washed in water to avoid
the risk of fire, including spontaneous
combustions, do not dry:
• Items containing foam rubber, or any
similarly textured rubber-like materials.
• Any items on which you have used a
cleaning solvent or which contain flamm.
able liquids or solids, such as naptha,
gasoline, or other oils or waxes.
Table of Contents
Section 1:
Specifications ........................... 14 & 15
Section 2:
Installation and Operation
Installation Clearances ......................17
Make Up Air .....................................19
Electrical Requirements .....................19
Gas Requirements ............................19
Burner Set Up ..................................19
Exhaust Installation ..................20 & 21
Installation Dimensions .....................20
Operating Instructions ......................22
Characteristics of a Running Dryer .....22
Description of Control .......................22
Section 3:
Programing
Dexter Live ......................................26
Dexter Live Create Account .......... 27-29
USB Programing ..........................30-33
Manual Programming .................. 36-49
Section 4:
Wiring Schematics
Dryer Idle- No Coins Added ...............52
Coins Added-Motor Starting and
Running ......................................52
Heat Circuit ......................................53
Over Temperature Thermostat ...........53
Cool Down .......................................53
End of Cycle .....................................53
Wiring Diagram for DDAD Dryer .........54
Wiring Schematic for DDAD Dryer ......55
Section 5:
Service Procedures
Clothes Door Removal .......................58
Dexter Safety
Guidelines
WARNING
For your safety, the information in this manual
must be followed to minimize the risk of fire
or explosion or to prevent property damage,
personal injury or loss of life.
IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch: do not use any
telephone in your building.
• Clear the room, building or area of all occupants.
• Imm.ediately call your gas supplier from a
neighbor’s telephone.
• Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the
fire department. Installation and service must be
performed by a qualified installer, service agency or
the gas supplier.
To activate your warranty, be sure to return
your red warranty form to the factory.
Please have serial number and model
ready when calling for assistance.
10
Part # 8533-090-001 7/21