MWP83-P1M Cordless Mouse
Page 6 of 10
1.0 Edition
4.
Now, the mouse is in power off mode. No operation can be done.
Power on the mouse
To activate the mouse again, press the Connect button on the bottom of the mouse
once. (DO NOT depresses the Connect button for more than 1.5 seconds when
resuming the mouse from power off mode.) The red light will turn on, and the mouse
is ready for normal operation.
Note:
Slide switch must in “ON”.
RECEIVER STORAGE
For travel and loss prevention, store receiver in cavity on the bottom of the mouse.
Storing receiver:
To store in the mouse bottom, place USB plug end of
receiver (A) into place then snap bottom of receiver into
position (B). Receiver will now be locked into position.
Removing Receiver:
Using the tip of your finger, life receiver from USB plug end
first and remove from cavity. The USB is now active and
ready to be inserted into your computer’s USB port.
GENERAL SPECIFICATIONS
5 Buttons Cordless Mouse.
800 dpi hardware resolution.
Low power indicator.
Power ON/OFF switch.
1 channel RF Digital Radio Frequency.
Ergonomic and enlarge buttons design for comfortable grip.
2 AAA batteries to operate the mouse.
