MWP83-P1M Cordless Mouse
Page 5 of 10
1.0 Edition
connect button on the mouse. The LED will start blinking, when the
connection is established.
Move the mouse around to test if it was successful.
5. If the synchronization is not successful for some reason please
a. Remove the batteries and unplug the receivers
b. Wait for 20 sec then to try the step 1 to 4 again
Note: * During normal use, please make sure that the mouse is no more than 3 ft
away from the receiver in order to have reliable connection.
** The LED on the receiver will light up or blink while the mouse is being used
Operation Guide
BATTERY LOW INDICATION
When battery voltage level goes under the preset level, the LEDs indicator on the
mouse wheel cover and the receiver will blink frequency. Although the mouse can
still work for a while, the user, at this time, should have a new set of batteries ready for
replacement as soon as possible.
POWER ON/OFF MOUSE
MWP83-P1M designed 2 methods for power saving, you can power ON/OFF by A
or B.
A. By sliding the ON/ OFF switch on the bottom.
B. The patent of ID power ON/OFF function, as following:
Power OFF the mouse
1.
Be sure the mouse is NOT in sleep mode. If it is, press any key to wake it up.
2.
Press and hold the Connect button on the bottom of the mouse for more than 2
seconds.
3.
The red light will flash the go off.
