MWP141-P1M 27MHz Wireless Optical Mouse page 5 of 8
1.0 Edition
gradually from standby mode to sleep mode, if it is not being used.
Standby mode
– Around 1 second after the mouse stops moving, it enter into standby mode.
Sleep mode
– If the mouse is left intact for around 8 minutes, it goes to sleep mode and shuts
down the sensor to maintain minimum power consumption. No moving operation is possible in
this mode.
WAKE UP THE MOUSE
This mouse can work promptly under standby mode so users might not be able to tell the
existence of this mode. But, in sleep mode, users have to press any button to wake up the mouse
for normal operation.
RECEIVER STORAGE
For travel and loss prevention, store receiver in cavity on the bottom of the mouse.
Storing receiver:
To store in the mouse bottom, place USB plug end of receiver (A) into place then snap bottom of
receiver into position (B). Receiver will now be locked into position.
Removing Receiver:
Using the tip of your finger, life receiver from USB plug end first and remove from cavity. The
USB is now active and ready to be inserted into your computer’s USB port.
Push
out
Push
in
B
A
