Dexcowin ADX4000W, User Manual

Page: 80 / 88

USER Manual
79
9 Inspection items before repair request
9.1 Confirm items before requesting inspection
If abnormality is found in product, confirm following items before inspection request.
Symptom Steps to take
Po
w
er
d
ef
ec
t
After turning on power,
both sound or LCD
screen are not turned on

Confirm battery is mounted correctly and replace
with charged battery.

If not using product for a long time, separate
battery from product to prevent battery discharging
LCD screen is not
displaying after power
on sound is heard

While system is booted, LCD screen may not be
displayed for a while. Wait until product UI is
displayed by PC booting completion after passing
DEXCOWIN logo. If screen is not displayed after a
few minutes, contact designated A/S center.
While using (including
X-RAY exposure), if
power turns off
automatically

Check battery residual quantity.

This product supports automatic power turn off
function to reduce battery consumption.
Exposure defect
When X-RAY is working
for exposure, and
exposure sound does
not go off

Be sure to set exposure setting value before X-RAY
exposure, and press READY button for exposure.

Confirm battery residual quantity, and replace with
charged battery. X-RAY exposure may not be
performed if battery level is low.

Check if PC is connected through USB cable
normally and separate the USB cable.

Check if the panel of LCD display is X-RAY mode. X-
RAY exposures only with X-RAY panel.