DEWTEQ
User manual DT60L Dehumidifier
____________________________________________________________________________________________________________
Page 8 of 10
Hour(s) you set as you press the Timer button, after releasing it for 8 seconds around, the display
window will return to the room humidity.
As the set time has been reached, the compressor will
stop working automatically.
4. Press HUM setting button to set the required relative humidity, we can set 40%, 50%, 60% or
70%. The relative indicator will light ON.
5. Press Dry function is turbo ventilation to dry the moisture in the air continuously, so it could
Help todry the laundry.
6.
If you don’t want to dry the air, just want to circulate the air or remove the odor inside the room,
please press ANION button.
7. Press CFT buttons to start the energy saving mode. (60% humidity, slow wind).
8. To turn off the unit, press Power button again.
10. Continuous Drain Connection
Continuous drain pipe is provided and it is located in the water collection tank compartment, please use
this pipe for continuous drain. Water collection tank remains in its place during continuous drain.
Note: During the operation drainage pipe should never be in higher position than the hose
connector.
11. Cleaning The Air filter
Always turn OFF the unit and disconnect the main cable before cleaning.
The filter should be cleaned regularly based on dust levels in your room at least every two weeks.
Remove the filter and clean with a vacuum cleaner or soapy water no hotter than 40°C. Rinse and dry
completely before inserting back into the dehumidifier.
Note: Never use the device without air filter.The working performance of the dehumidifier will be
greatly reduced if the air filter is blocked with dust. Check the AIR filter frequently based on your
dust levels in the room.
