DEWTEQ
User manual DT60L Dehumidifier
____________________________________________________________________________________________________________
Page 7 of 10
8. Control Panel Keys
1.
Key “Power” used to turn the unit ON or OFF.
2. Key
“Timer” used to set the ON-OFF timer for the Dehumidifier.
3.
Key “HUM”is used to set the desired humidity from40% to 80%RH in the step of 10%
4.
Key “Speed” is used to set the required fan speed
5.
Key “Dry” is used to dry the moisture in the air continuously, so it could help to dry the laundry
6.
Key “Anion” is used to remove the odor inside the room
7.
Key “ CFT” is used to set default target humidity and settings
9. Operating Dehumidifier
When you first use your dehumidifier it will reduce the room humidity down to your target (say 55%RH).
As the room becomes dryer the dehumidifier collects less water and takes longer to fill the tank, this is
perfectly normal. When the target relative humidity has been reached the dehumidifier will stop collecting
water.
Ensure the tank is correctly fitted, if the tank is full or is not in place, the “Empty Tank” shows on display
and the dehumidifier will turn off.
1. Turning the unit ON and OFF by using this button
Press ON/OFF key once display will turn ON, unit begins to work.Press ON/OFF key once again to
switch the unit OFF.
2. Press Speed/ ventilation button to set the ventilation speed, high, low. The relative indicator
will light ON
3. PressTimer button to set the operating hour you need. The display window will show the
