DewStop breeze easy F100-1W, Installation Manual

Page: 7 / 20

Pre-Installation
5
NOTE: If installing in existing construction,
you must have access to space above and
below the installation location.
PLANNING FOR SUCCESSFUL
INSTALLATION
When installing the ventilation fan in a new
construction site, install the main body of the fan
and duct work during the rough-in construction of
the building. The grille should be installed after the
finished ceiling is in place.
When installing in existing construction, use the
dimensions on page to determine the required hole
size for the ceiling. Grille edge should overlap
finished ceiling.
Not for use in cooking area - see installation
instructions.
Cooking area
Do not install above or
inside this area
Cooking
Equipment
Floor
Do not install ventilation fan in areas where the duct
work will require configuration as shown.
Turning angle too sharp
Too many elbows
Avoid duct shrink
Elbow near the body
Fan
Body
Minimum 18”
INSTALLATION OPTIONS
We recommend installing the ventilation fan by securing the main body of the fan against one ceiling joist and using
the header bars as necessary for support of the adjoining joist.
There are multiple installation configurations possible for this ventilation fan. Not all configurations are shown. If your
installation requires a variation other than those shown, consult with a licensed contractor to determine the best
installation for your project. If you are replacing an existing fan, ensure that the new grille will adequately cover the
existing opening.