DewStop breeze easy F100-1W, Installation Manual

Page: 10 / 20

INSULATION*
(Place around and
over Fan Housing.)
Seal gaps
around
Housing.
ROUND
DUCT*
POWER
CABLE*
Seal duct
joints with
tape.
FAN
HOUSING
ROUND
ELBOWS*
ROOF CAP*
(with built-in
damper)
Keep duct
runs short.
WALL CAP*
(with built-in
damper)
*Purchase
separately.
OR
8
Connect duct
□
Install a circular duct to outlet and secure it with duct tape or clamps.
□
Install the duct (G) to the outlet with a gradient 1°~2° to the outside
□
as shown.
□
The ducting from this fan to the outside of the building has a strong
□
effect on the air flow, noise and energy use of the fan. Use the shortest,
□
straightest duct routing possible for best performance, and avoid installing
□
the fan with smaller ducts than recommended. Insulation around the ducts
□
can reduce energy loss and inhibit mold growth. Fans installed with existing
□
ducts may not achieve their rated airflow.
□
4” round is recommended for best performance.
□
Ensure duct joints and exterior penetrations are sealed with caulk or other similar
□
material to create an air-tight path and to minimize building heat loss and gain and
□
reduce the potential for condensation.
□
Place/wrap insulation around duct and/or fan to in order to minimize possible condensation buildup within the
□
duct, building heat loss and gain.
Installation
(continued)