27
EngLIsh
EC-Declaration of Conformity
Machinery Directive
Cut-Off Tool
DCS690
D
e
WALT
declares that these products described under
Technical Data
are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010,
EN60745-2-22:2011+A11:2013.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT
at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
.
Markus Rompel
Director Engineering
D
e
WALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
07.02.2018
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury
.
WARNING:
Indicates a potentially hazardous situation
which, if not avoided,
could
result in
death or
serious injury
.
CAUTION:
Indicates a potentially hazardous situation
which, if not avoided,
may
result in
minor or
moderate injury
.
NOTICE:
Indicates a practice
not related to
personal injury
which, if not avoided,
may
result in
property damage
.
Denotes risk of electric shock.
Denotes risk of fire.
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
DCS690
Voltage
V
DC
54
Type
1
Battery type
Li-Ion
Wheel diameter
mm
230
Wheel bore
mm
22.2
No load/rated speed
min
-1
6600
Wheel perimeter thickness (max.)
Metal
mm
3.6
Resin-bonded
mm
3.6
Thread size
M8
Water quick connector
mm
12.5
Weight (without battery pack)
kg
5.5
Noise values and vibration values under load (triax vector sum) according to
EN60745-2-22:
L
PA
(emission sound pressure level)
dB(A)
103.6
L
WA
(sound power level)
dB(A)
114.6
K (uncertainty for the given sound level)
dB(A)
3.2
Vibration emission value a
h
=
m/s
2
4.2
Uncertainty K =
m/s
2
1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING:
The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
English (original instructions)
CUT-OFF TOOL
DCS690
Summary of Contents for XR Li-Ion Flexvolt DCS690
