ENGlIsh
44
spECIFICaTIONs
DCG418
60V Máx*
9 000 rpm
Repairs
The charger and battery pack are not serviceable.
WARNING:
To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement) should be performed by a
D
e
WALT
factory service center or a
D
e
WALT
authorized
service center. Always use identical replacement parts.
Installing the Tool Connect™ Chip
1. Remove the retaining screws
21
that hold the Tool
Connect™ Chip protective cover
22
into the tool.
2. Remove the protective cover and insert the Tool
Connect™ Chip into the empty pocket
23
.
3. Ensure that the Tool Connect™ Chip is flush with the
housing. Secure it with the retaining screws and tighten
the screws.
4. Refer to
Tool Connect
™
Chip Instruction Sheet
for
further instructions.
